PM SERİSİ
2" Water Pressure Reducer;
The water pressure reducer is produced to reduce the pressure of high-pressure mains water and to prevent damage that may occur in the installations and devices connected to the installations.
General Specification
– Prevents the damage of water-hammer.
– Prevents the noise created by pressurized water.
– Provides water savings as it provides balanced pressure.
– In our laboratory tests, it has been observed that when we reduce a pressure of 7.8 bar to 3 bars, it saves 25% of water in total consumption.
– It protects washing machines, dishwashers, combi boilers and water heaters from the harmful effects of pressurized water.
| Measure | 2" (DN50) |
| Body | Brass |
| Coating | Nickel |
| O-Rings | NBR |
| Bow | Inox |
| Plastic Parts | PA6 GF30 |
| Maximum Inlet Pressure | 25 Bar |
| Output Pressure | 1.5 - 6.5 Bar |
| Factory Set Pressure | 3 Bar |
| Maximum Temperature | 40 °C |
| Recommended Flow | 233,33 l/min - 14 m3/hrs |
| Standard | TS EN 1567 |
Piston cover is mounted with steel bolts against breakage caused by excessive pressure.
The coating floors of our products are made of STEEL AISI 304 materials and are durable and long-lasting against abrasions that may occur during the passage of water.
Our products are manufactured according to the International EN 1567 standard.
2" Water Pressure Reducer;
The water pressure reducer is produced to reduce the pressure of high-pressure mains water and to prevent damage that may occur in the installations and devices connected to the installations.
General Specification
– Prevents the damage of water-hammer.
– Prevents the noise created by pressurized water.
– Provides water savings as it provides balanced pressure.
– In our laboratory tests, it has been observed that when we reduce a pressure of 7.8 bar to 3 bars, it saves 25% of water in total consumption.
– It protects washing machines, dishwashers, combi boilers and water heaters from the harmful effects of pressurized water.
Piston cover is mounted with steel bolts against breakage caused by excessive pressure.
The coating floors of our products are made of STEEL AISI 304 materials and are durable and long-lasting against abrasions that may occur during the passage of water.
Our products are manufactured according to the International EN 1567 standard.
| Measure | 2" (DN50) |
| Body | Brass |
| Coating | Nickel |
| O-Rings | NBR |
| Bow | Inox |
| Plastic Parts | PA6 GF30 |
| Maximum Inlet Pressure | 25 Bar |
| Output Pressure | 1.5 - 6.5 Bar |
| Factory Set Pressure | 3 Bar |
| Maximum Temperature | 40 °C |
| Recommended Flow | 233,33 l/min - 14 m3/hrs |
| Standard | TS EN 1567 |
Sertifikaları İndirmek İçin Üzerine Tıklayabilirsiniz.
