• PM Series 1/2″ Water Pressure Reducer With Manometer

    PM Series With Manometer

    1/2" WATER PRESSURE REDUCER

    PRODUCT CODE: 0515

PM SERİSİ

1/2" Water Pressure Reducer;

The water pressure reducer is produced to reduce the pressure of high-pressure mains water and to prevent damage that may occur in the installations and devices connected to the installations.

General Specification

– Prevents the damage of water-hammer.
– Prevents the noise created by pressurized water.
– Provides water savings as it provides balanced pressure.
– In our laboratory tests, it has been observed that when we reduce a pressure of 7.8 bar to 3 bars, it saves 25% of water in total consumption.
– It protects washing machines, dishwashers, combi boilers and water heaters from the harmful effects of pressurized water.

Measure1/2" (DN15)
BodyBrass
CoatingNickel
O-RingsNBR
BowInox
Plastic PartsPA6 GF30
Maximum Inlet Pressure16 Bar
Output Pressure1.5 - 6.5 Bar
Factory Set Pressure3 Bar
Maximum Temperature40 °C
Recommended Flow21,17 l/min - 1,27 m3/hrs
StandardTS EN 1567

Piston cover is mounted with steel bolts against breakage caused by excessive pressure.

The coating floors of our products are made of STEEL AISI 304 materials and are durable and long-lasting against abrasions that may occur during the passage of water.

Our products are manufactured according to the International EN 1567 standard.

1/2" Water Pressure Reducer;

The water pressure reducer is produced to reduce the pressure of high-pressure mains water and to prevent damage that may occur in the installations and devices connected to the installations.

General Specification

– Prevents the damage of water-hammer.
– Prevents the noise created by pressurized water.
– Provides water savings as it provides balanced pressure.
– In our laboratory tests, it has been observed that when we reduce a pressure of 7.8 bar to 3 bars, it saves 25% of water in total consumption.
– It protects washing machines, dishwashers, combi boilers and water heaters from the harmful effects of pressurized water.

Piston cover is mounted with steel bolts against breakage caused by excessive pressure.

The coating floors of our products are made of STEEL AISI 304 materials and are durable and long-lasting against abrasions that may occur during the passage of water.

Our products are manufactured according to the International EN 1567 standard.

Measure1/2" (DN15)
BodyBrass
CoatingNickel
O-RingsNBR
BowInox
Plastic PartsPA6 GF30
Maximum Inlet Pressure16 Bar
Output Pressure1.5 - 6.5 Bar
Factory Set Pressure3 Bar
Maximum Temperature40 °C
Recommended Flow21,17 l/min - 1,27 m3/hrs
StandardTS EN 1567
advanced divider

Sertifikaları İndirmek İçin Üzerine Tıklayabilirsiniz.

advanced divider

PM Series

PM Series - Water Pressure Reducer