EMNİYET VENTİLLERİ
1" Safety Valves;
Safety valves are safety equipment used to evacuate excessive pressure in closed-circuit heating systems and limit it to a predetermined value. Safety valves should be used to prevent damage to the system and dangerous situations that may occur due to high pressure. It also helps protect equipment such as heat exchangers and pressure tanks.
General Spesification
– Safety valves are produced with fixed adjustment at certain pressures according to EN 4126-1 standard and users are not allowed to change the pressure setting.
– The discharge pressure of the safety valve is written on the safety plug on the cover.
| Measure | 1" (DN25) |
| Body | Brass |
| Diaphragm | EPDM |
| Bow | Steel 10270-1 |
| Plastic Parts | PA6, GFR30, PP |
| Operating pressure | 1 - 10 Bar |
| Setting Presure | 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 Bar |
| Maximum Temperature | 110 °C |
| Standard | EN 4126-1 |
1" Safety Valves;
Safety valves are safety equipment used to evacuate excessive pressure in closed-circuit heating systems and limit it to a predetermined value. Safety valves should be used to prevent damage to the system and dangerous situations that may occur due to high pressure. It also helps protect equipment such as heat exchangers and pressure tanks.
General Spesification
– Safety valves are produced with fixed adjustment at certain pressures according to EN 4126-1 standard and users are not allowed to change the pressure setting.
– The discharge pressure of the safety valve is written on the safety plug on the cover.
| Measure | 1" (DN25) |
| Body | Brass |
| Diaphragm | EPDM |
| Bow | Steel 10270-1 |
| Plastic Parts | PA6, GFR30, PP |
| Operating pressure | 1 - 10 Bar |
| Setting Presure | 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 Bar |
| Maximum Temperature | 110 °C |
| Standard | EN 4126-1 |
Sertifikaları İndirmek İçin Üzerine Tıklayabilirsiniz.
